MSMF
Low inertia

Max speed : 6,000 r/min
Rated speed : 3,000 r/min
Rated output : 50 w to 1,000 w
Enclosure : IP65 ( Leadwire type )
, IP67 ( Connector type )

MQMF
Middle inertia ( Flat type )

Max speed : 6,500 r/min
Rated speed : 3,000 r/min
Rated output : 100 w to 400 w
Enclosure : IP65 ( Leadwire type )
, IP67 ( Connector type )

MHMF
High inertia

Max speed : 6,500 r/min
Rated speed : 3,000 r/min
Rated output : 50 w to 1,000 w
Enclosure : IP65 ( Leadwire type )

MSMF
Low inertia

Max speed : 5,000 r/mln , 4,500 r/min ( 4.0kw,5.0kw)
Rated speed : 3,000 r/min
Rated output : 1.0 kW to 5.0 kW
Enclosure : IP65 ( Leadwire type )

MDMF
Middle inertia

Max speed : 3,000 r/min
Rated speed : 2,000 r/min
Rated output : 1 kW to 5 kW
Enclosure : IP67 ( Connector type )

MGMF
Low speed high torque type

Max speed : 3,000 r/min
Rated speed : 1,500 r/min
Rated output : 0.85 kW to 4.4 kW
Enclosure : IP67 ( Connector type )

MHMF
High inertia

Max speed : 3,000 r/min
Rated speed : 2,000 r/min
Rated output : 1.0 kw to 5.0 kw
Enclosure : IP67 ( Connector type )

A6SG Series

A6SF Series

A6SE Series

A6N Series

A5 Series

Rated output : 50W to 1.5 kW
-20 bit incremental encoder
-17 bit absolute/incremental encoder
-all in one: speed, position, torque, full-closed control type

A5II Series

two-degree-of-freedom control system
Rated output : 50W to 1.5 kW
-20 bit incremental encoder
-17 bit absolute/incremental encoder
-all in one: speed, position, torque*, full-closed* control type
*Not applicable to two-degree-of-freedom control system

A5E Series

Rated output : 50W to 5.0 kW
-20 bit incremental encoder
-Position control (pulse train command)

A5EII Series

two-degree-of-freedom control system
Rated output : 50W to 5.0 kW
-20 bit incremental encoder
-Position control (pulse train command)

A5IIN Series

Ultra highspeed network type
Rated output : 50W to 15.0 kW
-Synchronized motion and precise CP control up to 32 axes with 100 Mbps communication
-standard ethernet cable using
-two-degree-of-freedom control system

A5IINL Series

Linear motor and DD motor control type
Compatable with 15.0 kW rotary AC servo motor
-Position, speed and thrust control
-Automatic setup lunction & automatic magnetic pole detection function
-standard ethernet cable using
-two-degree-of-freedom control system

A5IIMN Series

DC 24V Type
Rated output : 10W, 20W, 30W
-Synchronized motion and precise CP control up to 32 axes with 100 Mbps communication
-standard ethernet cable using
-two-degree-of-freedom control system

A5IIMNL Series

Linear motor control, DC 24 V type
Compatable with 30W rotary AC servo motor
-Position, speed and thrust control
-Automatic setup lunction & automatic magnetic pole detection function
-standard ethernet cable using
-two-degree-of-freedom control system

A5L Series

Linear motor and DD motor control type
Capacity of applying linear motor: compatible with 15.0 kW rotary AC servo motor
-Position, Speed, Thrust control
-Drasticcally reduced setup time by automatic setup
-Automatic magnetic pole detection function will detect the magnetic pole position of the linear motor.

A5B Series

EtherCAT communication driver type
Rated output : 50W to 15.0 kW
-Supports PC-based controller
-Passed Official EtherCAT Conformance Test
-Standard Ethernet cable using
-two-degree-of-freedom control system

A5A Series

General-purpose RS485 communication AE-LINK support type
Rated output : 50W to 5.0 kW
-Positioning is possible by built-in NC function
-Can connect up to 31 axes
-standard ethernet cable using
-two-degree-of-freedom control system
*AE-LINK is a registered trade mark of Asahi Engineering

E Series

Slim design and position control type
Rated output : 50W to 400W
-Ultra-small design and oulse train command type only
-Real-time auto gain tuning
-DIN-rain mountable (using mounting Kit)